Skip to main content

2010-2A-PAK-HPL

2010-2 PAK, enables High power loop for Aritech 2X-A panels
  • Enables High Power Loop expansion from 500mA to 800mA for Aritech 2X-A panels
  • Compatible with panel firmware 4.0 or higher
  • USB interface type 2.0
View all

Related products

At a glance

Overview

The fire panel allows for its capabilities to be extended by use of USB dongles. These USB dongles are called PAK, which stands for Panel Activation Key. The use of the PAK will activate additional high-end feature(s) in the panel. Depending on the required functionality, separate and multiple PAKs can be used to enable these functionalities. Functionalities like number of nodes/loops, supported detector protocol, used TCP/IP communication protocol for remote monitoring, communication towards management software like BACNet or Modbus, etc, can be enabled by usage of the PAKs. The PAK is tied to the serial number of the panel, but does not have to stay connected to the panel. It can be removed once the PAK has been installed, and the feature is enabled in the panel. It is therefore recommend that PAKs stays with the panel at all time, for example in case of performing reset functions or re-installations.

Details

  • Enables High Power Loop expansion from 500mA to 800mA for Aritech 2X-A panels
  • Compatible with panel firmware 4.0 or higher
  • USB interface type 2.0

Technical specifications

Physical
Form factor
Small
Physical dimensions
22 x 70 x 5 mm (W x H x D)
Net weight
75 g
Shipping weight
110 g
Mounting type
In cabinet
Environmental
Operating temperature
-5 to +40°C
Storage temperature
-20 to +50°C
Relative humidity
Max. 95% noncondensing
Regulatory
Certification
EN54-13
EN54-2
Standards
EN54-2
EN54-13
Environmental
CPD
WEEE
RoHS

Downloads

All downloads

Datasheet

Installation sheet

Technical documentation

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.