Skip to main content

2010-1-NB

Conventional Fire Panel Accessory - Network Interface
  • Class A or B network support
  • Up to 1200 m between nodes
  • May be used for panels and repeaters
  • Up to 32 nodes / 64 zones
  • Plugable connectors
View all

At a glance

Overview

The 2010-1-NB RS485 FireNet network board allows for the creation of a bus mode class-B, or redundant class-A, 32 node network, supporting up to 64 zones. Each node may be a fire panel or a fire panel repeater. When optical fibre is preferred, when cable lengths above 1200 m between nodes are required, or in cases where high levels of EMC are expected, a standard RS485 to fibre converter may be used.

The Application

Networking makes it possible to repeat the user interface of any panel as required. There could be various reasons for using a network e.g.

i) if there are multiple exit doors in a building and at each exit door the status of the fire system is required

ii) where the load of the system needs to be spread to safeguard against failure of a single panel

iii) to minimise cabling and installation costs

iv) for larger installations where multiple panels are required but yet central control is required at a single location.

Networking is also useful when an existing system needs to be expanded. Instead of replacing a perfectly good panel with a larger one, simply install and additional panel and connect them together in a network. This makes it ideal for cost effective, future expansion.

Installation

The 2010-1-NB is connected directly to the main board of the panel. No cabling needs to be done beteen the network board and the main board.

Details

  • Class A or B network support
  • Up to 1200 m between nodes
  • May be used for panels and repeaters
  • Up to 32 nodes / 64 zones
  • Plugable connectors
  • Connects directly to the main board
  • Allows networking between conventional and addressable panels

Technical specifications

General
Network size (nodes)
up to 32
Physical
Form factor
Small
Physical dimensions
100 x 30 x 150 mm (W x H x D)
Net weight
40 g
Shipping weight
130 g
Mounting type
In cabinet
Environmental
Operating temperature
-8 to +42°C
Storage temperature
-10 to +50°C
Relative humidity
95% noncondensing max.
Protocol
Proprietary
Medium
Copper RS485
Operating mode
Class A or B
Distance between nodes (max)
1200 m

Downloads

All downloads

Datasheet

Installation sheet

Certificates

Other EU certificate

CPD / CPR

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.