2010-2A-PAK-HPL
2010-2 PAK, aktywuje pętlę wysokiej mocy w centralach Aritech 2X-A
- Aktywuje pętle wysokiej mocy, zwiększając moc z 500mA do 800mA dla central Aritech 2X-A
- Zgodność z firmware w wersji 4.0 lub wyższej
- Interfejs USB typ 2.0
Produkty powiązane
Na pierwszy rzut oka
Overview
The fire panel allows for its capabilities to be extended by use of USB dongles. These USB dongles are called PAK, which stands for Panel Activation Key. The use of the PAK will activate additional high-end feature(s) in the panel. Depending on the required functionality, separate and multiple PAKs can be used to enable these functionalities. Functionalities like number of nodes/loops, supported detector protocol, used TCP/IP communication protocol for remote monitoring, communication towards management software like BACNet or Modbus, etc, can be enabled by usage of the PAKs. The PAK is tied to the serial number of the panel, but does not have to stay connected to the panel. It can be removed once the PAK has been installed, and the feature is enabled in the panel. It is therefore recommend that PAKs stays with the panel at all time, for example in case of performing reset functions or re-installations.
Szczegóły
- Aktywuje pętle wysokiej mocy, zwiększając moc z 500mA do 800mA dla central Aritech 2X-A
- Zgodność z firmware w wersji 4.0 lub wyższej
- Interfejs USB typ 2.0
Specyfikacja techniczna
| Physical | ||
|---|---|---|
| Form factor |
Small
|
|
| Physical dimensions |
22 x 70 x 5 mm (S x W x G)
|
|
| Net weight |
75 g
|
|
| Shipping weight |
110 g
|
|
| Mounting type |
In cabinet
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-5 do +40°C
|
|
| Storage temperature |
-20 do +50°C
|
|
| Relative humidity |
Maks. 95% bez kondensacji
|
|
| Regulatory | ||
|---|---|---|
| Certification |
EN54-13
EN54-2
|
|
| Standards |
EN54-2
EN54-13
|
|
| Environmental |
CPD
WEEE
RoHS
|
|
Pobrania
All downloadsKarta katalogowa
Instrukcja montażu
Jeśli są dostępne, pliki do pobrania Certyfikatów, oprogramowania i oprogramowania sprzętowego oraz nośników są wyświetlane w ich języku domyślnym.