UC240
UltraSync Communicator with IP and 4G/2G dual path suitable for both fire and intrusion panels
Alternative products
At a glance
Overview
UC240 UltraSync Communicator is a dual path alarm signalling unit for transmitting alarm signals from a customer’s alarm panel to a Central Monitoring Stations (CMS). The monitoring path is based on IP and SIM 4G/2G mobile technology. The unit is designed for use in both security and fire systems.
• Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
• These monitored alarm signalling devices are small enough to fit inside most alarm panels. They use two signalling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
• The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
• The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
• EN50131 Grade 3 and EN50136 certified for intrusion systems.
• EN54-21 certified for fire alarm systems.
• Dual-path monitoring for low, medium and high risk sites, covering intruder applications, fire and more.
• These monitored alarm signalling devices are small enough to fit inside most alarm panels. They use two signalling paths – if the primary path is down, the secondary path kicks in. And if that happens, the secondary path will use the primary path reporting and polling times.
• The primary path uses IP technology to send alarm signals over the customer’s network or broadband hub.
• The secondary path uses 4G or 2G mobile connectivity – with dual SIMs for extra resilience.
• EN50131 Grade 3 and EN50136 certified for intrusion systems.
• EN54-21 certified for fire alarm systems.
Alarm panel interfaces
• 16 general purpose alarm inputs (Logic High = +2V to +30V/Logic Low = <1.3V)
• 3 relay outputs
• Unconnected state: Logic Low
• Standard screw terminals
• Programmable function output-for remote control of site devices
• Line fault output-for status indication at site of alarm signalling path
• Dial Capture with phone line simulation
• Onboard RS232 or RS485 for direct panel interface to some panels
• 3 relay outputs
• Unconnected state: Logic Low
• Standard screw terminals
• Programmable function output-for remote control of site devices
• Line fault output-for status indication at site of alarm signalling path
• Dial Capture with phone line simulation
• Onboard RS232 or RS485 for direct panel interface to some panels
Dial Capture features
• Converts dialler alarm systems into high security signalling devices
• Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3
• Alarm panel interface supports: Ademco Contact ID, Ademco Hi Speed, Ademco 4+1, Ademco 4+2, SIA 1/2/3
Configuration
• Simple single push button pin learn
• iOS and Android installer app
• Using on board menu driven by push buttons
• iOS and Android installer app
• Using on board menu driven by push buttons
Technical specifications
| General | ||
|---|---|---|
| Product line |
UltraSync
|
|
| Network | ||
|---|---|---|
| Communicator type |
2G
4G
Cellular
IP
|
|
| GSM frequency |
LTE: Penta-Band 700 (Bd28) / 800 (Bd20) / 900 (Bd8) / 1800 (Bd3) / 2100 MHz (Bd1) + GPRS Dual band (900/1800 MHz)
|
|
| Reporting | ||
|---|---|---|
| Reporting protocols |
Contact ID
SIA
|
|
| Supported receivers |
UltraSync
|
|
| Interfaces | ||
|---|---|---|
| Ethernet |
RJ-45 1000 Mbps Ethernet Interface
|
|
| Antenna |
Yes, included
|
|
| Input/Output | ||
|---|---|---|
| Inputs |
16 general purpose alarm inputs
|
|
| Outputs |
3 relay outputs
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
9.5 to 30 VDC
|
|
| Current consumption |
85mA @12 VDC
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
95 x 67 x 17 mm
|
|
| Colour |
Black
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
-10°C to +55°C
|
|
| Relative humidity |
5 to 75%
|
|
| Environment |
EN50130-5 ; Class II - Indoor (general)
|
|
| Regulatory | ||
|---|---|---|
| Certification |
EN50131 Grade 3
EN50136
EN54-21
|
|
Downloads
All downloadsDatasheet
Installation sheet
Other EU certificate
If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.