Skip to main content
Phasing out

W76571

DT15-AM/1900 Fresnel EN Grade 3 Dual Motion Sensor, Anti mask
  • 15m/10m dual technology detector
  • Active IR anti-masking
  • Enhanced DT processing
  • Anti-Stealth technology™
  • Selectable End Of Line resistances
View all

At a glance

Performance Line- Dual Technology

The Performance Line is the line of legacy Guardall motion sensors (PQ15 and DT15 series) and both series are intended for the protection of residential and commercial premises.
DT15 AM incorporates a highly effective X-band microwave together with well-proven PIR technology. This pairing produces a superb dual technology sensor that greatly improves false alarm immunity.
Featuring an advanced ‘through-the-lens’ active IR and microwave anti-mask system, the sensor detects any attempt to mask or inhibit detection of one or both alarm technologies. Anti-stealth precisely analyses microwave and PIR activity in
a room and significantly increases detection in extreme conditions. It also combats intrusion attempts using infrared screening materials, and a sneak mirror is used to improve catch performance.

It has been designed to be simple to install with three LED’s within the sensor to facilitate efficient analysis of the technologies. Incorporating a unique varifocal lens design that allows the unit to be mounted between 2.1 and 2.5m without
adjustment.

Details

  • 15m/10m dual technology detector
  • Active IR anti-masking
  • Enhanced DT processing
  • Anti-Stealth technology™
  • Selectable End Of Line resistances
  • Adjustment-free optics
  • Redesigned housing shared across platform range
  • Varifocal lens design
  • EN50131 Grade 3

Technical specifications

General
Technology
Dual
Application type
Wall mount
Anti masking
No
Pet immune
No
Camera
No
Microwave range adjustment 50% to 100% of range via pot adjustment
Fluorescent lights Microwave channel rejects these to within 2m of an 80W tube
Aux. period Duration of fault or mask condition.
Walk test LED's RED - Unit alarm
GREEN - Microwave channel
YELLOW - PIR channel
Remote LED enable Control of LED indication using Test line
Anti-masking Indicated on Aux output and LED’s if selected
Microwave/PIR trouble Indicated on LED’s if selected
Detection
Max. detection range
15 m
Microwave frequency (nom.)
X-band
Max. microwave output (at 1m)
0.011 µW/cm2
Undercrawl protection
No
Alarm time
3 s
Peak-to-peak ripple immunity
2 V at 12 VDC
PIR coverage adjustment Vertically: none required  
Horizontally: ±5° corner mounted
Wired/wireless
Wired-wireless
Wired
Inputs/outputs
Alarm relay characteristic
Normally closed (NC), voltage free, solid state relay rated at 30 VDC, 50 mA with a max. 26 ohm ON resistance.
Tamper relay characteristic
Normally closed (NC), voltage free, solid state relay rated at 24 V dc, 50 mANormally closed (NC), voltage free, solid state relay rated at 24 VDC, 50 mA
Test Input Low or open circuit for LED disable, detector supply to activate
Electrical
Power supply value
9 to 16 VDC (12V nominal)
Current consumption
13 mA at 12 V (quiescent no alarm)
21 mA at 12 V (max. all LEDs ON)
Physical
Physical dimensions
110 x 66 x 42 mm (H x W x D)
Shipping weight
135 g
Colour
White
Environmental
Operating temperature
-10 to +55°C (14 to 130°F)
Environment
Indoor
Regulatory
EN50131 grade
Grade 3