Skip to main content

POC252-1CX-1P

1-Port IP over Coax Extender with PoE-AT (Camera End)
  • 1 Port (RJ45) with PoE-at support (upto Max. 25W)
  • Auto-negotiation and auto-MDI/MDI-X
  • IEEE 1901 communication Standard
  • Wavelet-OFDM modulation
  • 128-bit AES security encryption
View all

At a glance

Overview

The IFS® Power over Coax Network Switches and Media Converters by Interlogix® are designed to transmit both Ethernet data and PoE over coax cable up to 1 km (3,280 ft). This solution provides a cost-effective approach by reducing installation cost and increasing ROI by utilizing existing coax to migrate an existing analog video system to an IP video surveillance system.

The PoC Network Switches and Media Converters also provide built-in PD-alive monitor health and status of an IP camera. In addition, this solution eliminates the need for providing local power at an IP PoE camera location.
• The POC2502-8CXP-2T-2S is an 8-port Power over Coax Managed Switch that supplies data and power transmission on coax via BNC ports. In addition, the two RJ45/SFP Gigabit combo ports provide a connection to an Ethernet network.

• The POC2502-16CXP-2T-2S is a 16-port Power over Coax Managed Switch. The switch supplies data and power transmission on coax via BNC ports as well as two RJ45/SFP Gigabit combo ports for connection to an Ethernet network.

• The POC252-1CX-1P Power over Coax Media Converter is for use at the camera end to convert the data/power from the coax. The switch provides 10/100Mbps data and POE-af/at compliant power on the RJ45 port for an IP camera.

• The POC252-1CXP-1T Power over Coax Media Converter transmits data and injects power over coax for use with the POC252-1CX-1P. This is used to deploy a single IP camera on a length of coax cable and a multi-port BNC switch is not needed.

Details

  • 1 Port (RJ45) with PoE-at support (upto Max. 25W)
  • Auto-negotiation and auto-MDI/MDI-X
  • IEEE 1901 communication Standard
  • Wavelet-OFDM modulation
  • 128-bit AES security encryption
  • Daisy-chain (up to 3 devices on one link)
  • Half-duplex back pressure and IEEE802.3x full-duplex pause-frame flow control
  • Remote power up to 1Km
  • Compatible with POC252 Switches and Head End Media Convertor

Technical specifications

General
Technology
IEEE1901
Compatible with MCR rack
No
Connections
Coax ports
1
Connector
BNC
RJ45 ports
1
Port type
10/100
Fault relay output
No
Electrical
Power supply type
Via Power Over Coax
Power consumption
25 W
PoE/PoE+
PoE-at
PoE power budget
Up to 25 W
Redundant power
No
Physical
Physical dimensions
94 x 70 x 26 mm
Net weight
375 g
Colour
Black
Mounting type
Wall mount
Environmental
Operating temperature
-10 to +60°C
Storage temperature
-40 to 75°C
Relative humidity
0 to 95% noncondensing
Physical Ports
10/100Base-T(x) Ports RJ-45 (1) & BNC (1)
Port Configuration Auto MDI/MDI-X
Port Speed Auto-negotiate
LED Indicators and Switch
Regulatory
Regulatory Standards FCC Part 15 Class A, CE
IEEE Standards IEEE 802.3 Ethernet
IEEE 802.3u Fast Ethernet
IEEE 802.3af Power over Ethernet
IEEE 802.3at Power over Ethernet Plus
Power over Ethernet
PoE Standard IEEE 802.3af / 802.3at PoE
PoE Power Supply Type End-span
PoE Power Budget Upto 25W via Coax
Power Pin Assignment (RJ45) 1/2(+), 3/6(-)
Power Pin Assignment (COAX) BNC center pole : DC+ / Hi, BNC shield : DC - / Lo
IP Over Coax Interface
Cabling Coaxial cable: 75 ohm, RG-6/U cable (Improved Performance)
RG-6/U cable, less than 12Ohm/1,000ft.
RG59/U cable, less than 30Ohm/1,000ft.
Ethernet Communication Standard IEEE1901
Modulation Type Wavelet-OFDM
Security 128-bit AES encryption
Frequency Band 2 ~ 28 MHz
Data Rate (Upload/Download)*
200m 93 / 93 Mbps
400m 93 / 92 Mbps
600m 92 / 88 Mbps
800m 83 / 75 Mbps
1000m 74 / 55 Mbps
Typical Power Over Coax*
200m 29W (56VDC in) 16.9W (PoE+ in)
400m 22W (56VDC in) 14.3W (PoE+ in)
600m 13W (56VDC in) 10.2W (PoE+ in)
800m 10W (56VDC in) 8.3W (PoE+ in)
1000m 8W (56VDC in) 7.1W (PoE+ in)
* Based on RG-59 Bare Copper cable: Data rate and power performance is subject to the quality of cable used and environmental factors.
Maximum Distance
PoE+ output 200m
PoE output 600m
Without PoE (Data only) 1,200m

Downloads

All downloads

Datasheet

User manual

Certificates

If available, the downloads of the Certificates, Software & Firmware and Media are displayed in their default language.