KE-IO3101-M
Inteligentny adresowalny moduł sterownia zasilaniem (1 wyjście) z izolatorem zwarć
- Zasilany z pętli, bez dodatkowych kosztów zasilaczy i instalacji
- Zapewnia adresowalne wyjście z dwubiegunowymi, bezpotencjałowymi stykami przełącznymi
- Wyjście normalnie otwarte / normalnie zamknięte, pełna elastyczność instalacji
- Programowalna aktywacja dowolnym pobudzeniem wejściowym
- Montaż DIN lub naścienny
Produkty powiązane
Na pierwszy rzut oka
General
The innovative Excellence series of intelligent addressable devices offers advanced features for reliability and peace of mind. Coupled with features for ease of installation and maintenance on new fire detection systems, it’s a perfect match for exceptional overall performance.
The Excellence series input/output devices are designed to provide much needed flexibility to input monitoring and output switching. These modules, combined with the powerful features of a Kidde Excellence series addressable CIE, give customers versatility for diverse applications.
The KE-IO3101-M is an Excellence series addressable mains relay unit with integrated short circuit loop isolation. Powered directly from the Excellence loop, it offers double pole, potential free, change-over relay contacts.
Applications
The KE-IO3101-M is designed for controlling the main electrical supply of ancillary, mains powered equipment. The unit is ideal for the control of door release circuits, extract fans and dampers. The relay may be programmed to be activated by any single device, groups of devices or all system devices. All types of system input signals can be arranged to operate the KE-IO3101-M which can include control panel indicators, zonal outputs, call points or detectors. Both normally closed and normally open relay connections are provided, which if wired incorrectly, can simply be reconfigured in the programming of the unit.
The KE-IO3101-M may be located anywhere on the Kidde Excellence loop where it occupies only 1 of 128 available addresses. Housed in a low profile molding, the interface is designed to clip directly onto a standard DIN rail fixing or be installed in a suitable wall mount housing. It is intended for installation for installation inside the equipment to be switched, thereby offering savings in installation costs
Installation & Maintenance Features
The KE-IO3101-M is connected to the CIE via a 2-wire communication loop that carries both power and control data. Tri-Colour LED indicators positioned on the front face of the unit provide the engineer with clear identification of the operational state of the unit, as well as the status of any input and/or output control. Additional manual test facilities on the unit allows local testing without the need for control panel intervention, saving time during installation and commissioning.
Excellence series devices use an advanced digital data communications protocol with extensive error correction algorithms to ensure system reliability.
Szczegóły
- Zasilany z pętli, bez dodatkowych kosztów zasilaczy i instalacji
- Zapewnia adresowalne wyjście z dwubiegunowymi, bezpotencjałowymi stykami przełącznymi
- Wyjście normalnie otwarte / normalnie zamknięte, pełna elastyczność instalacji
- Programowalna aktywacja dowolnym pobudzeniem wejściowym
- Montaż DIN lub naścienny
- Funkcja testowania lokalnego ułatwiająca weryfikację działania
- Lokalny, czytelny wskaźnik stanu pracy ułatwiający konserwację
Specyfikacja techniczna
| General | ||
|---|---|---|
| Status indication |
Trójkolorowa dioda LED
|
|
| Compatibility |
Systemy Kidde Commercial Excellence
|
|
| Addressing method |
Mikroprzełączniki
|
|
| Address range |
1 do 128
|
|
| Electrical | ||
|---|---|---|
| Power supply type |
Zasilanie pętlą
|
|
| Operating voltage |
17 do 29 VDC
|
|
| Current consumption |
300 μA @ 24 VDC (spoczynek)
2,5 mA @ 24 VDC (aktywacja)
|
|
| Communication voltage |
4 do 11 V (pulsujące)
|
|
| Output | ||
|---|---|---|
| Output quantity |
1 x Dwubiegunowy
|
|
| Output type and rating |
Podwójne przełączanie - 1 A @ 60 VDC / 5 A @ 250 VAC (obciążenie oporowe)
|
|
| Cable specification | 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair | |
| Isolation | ||
|---|---|---|
| Type |
Negative line break
|
|
| Loop current |
2,5 mA (aktywne)
|
|
| Series resistance |
<0,08 Ω
|
|
| Switch current |
1,05 A (ciągły) / 1,4 A (krótki)
|
|
| Leakage current |
<1 mA
|
|
| Isolation voltage |
14 do 15,5 VDC
|
|
| Reconnect voltage |
14 do 15,5 VDC
|
|
| Impedance requirements | ≤ 32 devices between isolators | |
| Quantity per loop | 128 | |
| Physical | ||
|---|---|---|
| Physical dimensions |
109 × 88 × 40 mm (S x W x G)
|
|
| Net weight |
220 g
|
|
| Colour |
Biel sygnałowa (RAL 9003)
|
|
| Mounting type |
DIN-rail
Montaż nawierzchniowy
Wall mount
|
|
| Material |
PC / ABS
|
|
| Cable specification |
Loop: 0.13 to 3.31 mm² (12 to 26 AWG) shielded/unshielded twisted-pair < 52 Ω , < 500 nF
|
|
| Environmental | ||
|---|---|---|
| Vandal proof |
No
|
|
| Operating temperature |
-22 do +55°C
|
|
| Storage temperature |
-30 do +65°C
|
|
| Relative humidity |
10 do 93% bez kondensacji
|
|
| Environment |
Indoor
|
|
| IP rating |
IP30
|
|
| Regulatory | ||
|---|---|---|
| Compliancy |
CE
REACH
RoHS 3
WEEE
|
|
| Certification |
CPR
|
|
| Standards |
EN54-17, EN54-18
|
|
Pobrania
All downloadsKarta katalogowa
Instrukcja montażu
Swiadectwa
Jeśli są dostępne, pliki do pobrania Certyfikatów, oprogramowania i oprogramowania sprzętowego oraz nośników są wyświetlane w ich języku domyślnym.