ATS1115-N
ATS betjeningspanel 2x16 karakter LCD med integreret kort læser
- 2 x 16 characters LCD
- user adjustable buzzer
- user adjustable LCD contrast
- 16 Area indication
- door release indication
Alternative produkter
Overblik
Remote Arming Stations
The ATS 1115 is part of the Remote Arming Station family for the advisor MASTER security system. The RAS family consists of a range of keypads and card readers which can be used in different environments, in and out-door. The ATS1115 can be used for configuration and management of the system, as well as for opening doors and arming/disarming areas. In an easy way, the ATS1115 gives a status overview from your security system with both visual and audio indicators.
Product Overview
The ATS1115 is a modern ergonomic design and has a clearly readable text on a 2 x 16 characters LCD for displaying system programming, alarm and access control functions. The viewing angle of the display is adjustable via the keypad as well as the volume level of the built-in buzzer. Four arrow keys will navigate the user easily through the programming and operational features and 6 additional functions key will complete this user-friendly interface.
Built-in card reader
The ATS1115 has a built in smart card reader. The ATS1115 can be used for arming/disarming using either the PIN or the card or a combination of the two for higher security needs. It is suitable for using the multiple card badging techniques which are available for the advisor MASTER control panel family. A user could arm the system in the evenings by badging his card three times within 10 seconds interval. Another application could be for doors which can be programmed so that badging once unlocks, badging twice with the same card keeps the door unlocked to allow people in and out without card, and badging three times re-locks the door.
Indications
Four status LED's will continuously update the user on mains condition, faults, access control and alarms.
Green - Power LED is on when the control panel is powered by the AC supply.
Yellow - Fault LED illuminates to indicate detection of a system fault.
Blue - Access LED flashes when access to an area assigned to the RAS is granted.
Red - Alarm LED illuminates when there is a system tamper or an area assigned to the RAS is in alarm state.
The Arming Station can display the status of 16 areas using 16 LED's on the front, while the LCD shows details of alarms or a pre-programmed text.
The area may be identified by viewing the 16 area LEDs visible when the RAS cover is open or removed and the indications are as follows:
• The LED illuminates when its corresponding area is armed.
• The LED flashes slowly when a fault is detected.
• The LED flashes quickly when an alarm occurs.
Green - Power LED is on when the control panel is powered by the AC supply.
Yellow - Fault LED illuminates to indicate detection of a system fault.
Blue - Access LED flashes when access to an area assigned to the RAS is granted.
Red - Alarm LED illuminates when there is a system tamper or an area assigned to the RAS is in alarm state.
The Arming Station can display the status of 16 areas using 16 LED's on the front, while the LCD shows details of alarms or a pre-programmed text.
The area may be identified by viewing the 16 area LEDs visible when the RAS cover is open or removed and the indications are as follows:
• The LED illuminates when its corresponding area is armed.
• The LED flashes slowly when a fault is detected.
• The LED flashes quickly when an alarm occurs.
Mounting
The RAS cover is hinged at the bottom. To open, grasp the cover at the sides or the top and pull gently — the cover will swing down on its pins. The cover may be fully removed by gently prising one of the pins away from the body of the RAS and pulling. The metal mounting plate at the rear is held by a locking screw.
Detaljer
- 2 x 16 characters LCD
- user adjustable buzzer
- user adjustable LCD contrast
- 16 Area indication
- door release indication
- built-in smart card proximity reader
Tekniske specifikationer
| General | ||
|---|---|---|
| User interface |
2 x 16 Char LCD
Touch Buttons
|
|
| Product line |
ATS Master
|
|
| Status LEDs |
16
|
|
| Integrated reader |
Nærhed
|
|
| System | ||
|---|---|---|
| Supported card types |
HiTag2
|
|
| Addressing type |
DIP Switches
|
|
| Supported cable type |
WCAT 52/54 or equivalent
|
|
| Communication | ||
|---|---|---|
| Communication type |
Kablede
|
|
| Inputs/Outputs | ||
|---|---|---|
| Inputs |
1
|
|
| Input type |
Request to Exit
|
|
| Outputs |
1
|
|
| Output type |
50 mA Max
|
|
| Electrical | ||
|---|---|---|
| Operating voltage |
9 - 14 VDC
|
|
| Power supply type |
VDC
|
|
| Current consumption |
35 mA typical
165 mA max
|
|
| Physical | ||
|---|---|---|
| Physical dimensions |
92 x 165 x 25 mm
|
|
| Colour |
Hvid
|
|
| Form factor |
Lodret
|
|
| Cover |
Flip Cover
|
|
| Mounting type |
Overflademontering
|
|
| Environmental | ||
|---|---|---|
| Operating temperature |
0 to +50°C
|
|
| Relative humidity |
0 to 95% noncondensing
|
|
| Environment |
Indendør
|
|
| IP rating |
30
|
|
| Regulatory | ||
|---|---|---|
| EN50131 grade |
Lønklasse 2
|
|
| Compliancy |
CE
RoHS
|
|
| Certification |
NFA2P
|
|
Downloads
All downloadsDatablad
Installatie fiche
Certificaten
Hvis de er tilgængelige, vises downloads af certifikater, software og firmware og medier på deres standardsprog.