Gå til hovedindhold

ATS1236

32 zoners 433Mhz trådløs modtager DGP
  • Adds wireless capabilities to Advisor Advanced
  • Two wired zone inputs
  • One programmable SPDT Form C relay output
  • Supports legacy 63-bit 433 MHz and new LoNa 433 MHz transmitters
  • Learn-mode technology
Se alle

Overblik

Increasing zone capacity

The ATS1236 wireless receiver adds wireless capabilities to the Advisor Advanced range of panels.
The wireless DGP supports most of the legacy 433 MHz 63-bit transmitters as well as the new generation of 433 MHz LoNa transmitters of which the wireless communication is fully encrypted, avoiding unauthorized interference. Up to 32 wireless sensors and up to 16 keyfobs can be learned in.
The ATS1236 wireless receiver provides two wired zone inputs and one programmable relay output.

Installation and programming

The wireless DGP needs to be installed outside the panel housing in order to assure a maximum wireless range. The 433MHz wireless solution will monitor the status and presence of each wireless device and will respond in case of an RF jamming condition.
The ATS1236 wireless receiver can be programmed from the keypad as well as from the downloader. The firmware of the module is remotely upgradeable.

Detaljer

  • Adds wireless capabilities to Advisor Advanced
  • Two wired zone inputs
  • One programmable SPDT Form C relay output
  • Supports legacy 63-bit 433 MHz and new LoNa 433 MHz transmitters
  • Learn-mode technology
  • Removable terminals
  • EN50131-1/EN50131-3/EN50131-6 Grade 2 Class II (pending) INCERT (pending)
  • Firmware upgradeable

Tekniske specifikationer

General
Expander type
Trådløs udvidelse
Product line
Advisor Advanced
Axon
Connection type
Databus connection
Compatibility
Advisor Advanced MR 4.2 or higher
System
Addressing
DIP Switches
Inputs
Total
32
No. of wireless zones
32 wireless sensors + 16 keyfobs
Onboard
2 wired
Outputs
Onboard
1
Type of outputs
SPDT Form C relay
Wireless
Operating frequency
433 MHz ældre
433 MHz LoNa
Electrical
Operating voltage
12Vdc via bus
Current consumption
typical : 47 mA
maximum : 51 mA
Integrated power supply
No
Physical
Physical dimensions
155 x 95 x 26 mm
Net weight
0.160 kg
Colour
Hvid
Material
ABS plast
Environmental
Operating temperature
-10°C to 55°C
Relative humidity
90% relative humidity non-condensing
Environment
EN50130-5 ; Klasse II - Indendørs (generelt)
Regulatory
Compliancy
CE
Certification
CE
EN50131 Grade 2
INCERT
Standards
EN50131 Grade 2 & INCERT pending